Machine housing

Whole machine body completely in stainless steel (1.4301) incl pipes, shafts, heat exchangers, strainers, electric control cabinet, infeed and discharge device.

Torsion-resistant, welded steel machine housing in a modern profile barrel composite construction. By selectively scaling of plate thicknesses the structural behavior and the power absorption is optimized in the machine housing. So are all mechanically highly stressed parts made of 8 mm stainless steel sheets.

Caustic zones

The caustic zones made of stainless steel results in a reduction of heat radiation by about 50%, because the thermal conductivity of stainless steel in comparison to normal steel is about half.

Whole machine body in all the hot zones are double-walled with 5 cm thick special material isolated, i.e. bottom, ceiling, side walls and back wall. The machine thus has only a small heat radiation, resulting in a significant energy saving.

• Very space-saving, user-friendly compact design.
• All control elements are located at the front of the machine.

Viewing window

Large viewing window on the machine longitudinal sides, where all the injections come in contact with caustic soak or hot water, can be controlled easily and safely.

Tail gate

Percale opportunity for caustic soda

Spray tanks

Easy to clean the spray tank by sloping floors.In order to prevent a heat transfer, the spray tanks are seperated and only connected through overflows.

Large double strainers inside the spray tanks, so that no dirt can get into the pumps and nozzles.

Main chain conveyor

Strong oversized main conveyor chains from a reputable manufacturer. Hardened 60 mm - track rollers, plates of high-strength steel C 45, C 15 E-hardened bolts, bushings hardened 16Mn Cr5.

In the area of bottle infeed and discharge, all chains in low maintainance, corrosion-proof design. The roller chains are equipped with special sintered and oil-impregnated sleeves, which give the chain its self-lubricating properties.To prevent corrosion the plates and rollers of the chains are equipped with a galvanic coating. The electroless nickel plating of the bolts followed by annealing brings an additional improved durability for improved corrosion protection in the joint area.

• Rolls, outer and inner plates electroplated nickel
• Stud nickel plated hardened and tempered standard studs
• Oil-impregnated sintered steel bushings