1.000 to 8.000 bottles / hour
Working Method
Single-ended machine using the combined soak- and spray method. Bottle cells mounted on an endless chain pass through the following zones:
Pre-sprinkling, discharge of remains, pre-spraying, caustic soaking, caustic flushing in two positions to remove labels, hot caustic spaying with high volume and low pressure.
Cool down area consisting of: Caustic-II zone, warm-water spray zone, cold-water spray zone and fresh-water spray zone.
Extensive drip zones result in low alkalinity in the water spray zones. The cascade principle, where the flow of water inside the machine is opposite to the transport direction of the bottles, results in an automatic regulation of temperature in all treatment zones.
Legend
1 Bottle infeed table 2 Bottle feeding 3 Bottle outfeeding 4 Bottle outlet conveyor 5 Main drive motor 8 Caustic-II spraying 9 Caustic-soaking I 11 Caustic showering 12 Hot caustic spraying 13 Residual caustic deflation | 14 Warm-water spraying I 16 Cold-water spraying I 17 Water pre-spraying zone 18 Clock- and interval spraying zone 19 Pre-sprinkling 22 Residual water deflation 25 Drainage for service-water 26 Discharge of remains 27 Dosage for soaking | 28 Heat recovery 30 Label discharger 31 Shards channel 32 Switchboard 33 Lights 34 Switchboard ventilation 35 Overflow 36 Heat exchanger 37 Vapor exhaust 38 Isolation |